VIEW® Pro Encoder E120

Supports all AV inputs for ultra high quality digital media distribution via your current IP network infrastructure to all endpoints.

High profile H.264 codec with lossless compression, with 1080p60 resolution, 4:4:4 color space, HDCP for content protection
Low bandwidth consumption and unlimited scalability
Standards based streams that interoperates with 3rd party systems
Software based system for video wall and video composition features that replace hardware video processors

+ High profile H.264 lossless compression

+ Full HD 1080p60 resolution

+ 24-bit true color with 4:4:4 color space

+ Ultra low latency—end-to-end

+ Full HDCP support

+ Any number of inputs & outputs in any combination

+ One source to many displays

+ Many sources to one display

+ Many sources to many displays

+ VIEW Virtual Matrix control application

+ Matrix view of all live sources & destinations

+ In-room controller - touch panel & web

+ 3rd-party control - AMX, Crestron, Utelogy

+ Existing IP network infrastructure

+ Uses standard CAT 5e/6 cabling

+ Interoperates with 3rd-party systems

+ RTSP/UDP streaming

+ Software license (one time, per unit)

+ Video-wall, Video-windowing, video-composition

+ Layout management

+ Text overlay, screen rotation

+ Auto-discovery of encoders & decoders

+ Device configuration & management

+ Project management

+ System monitoring & troubleshooting

Digital Video Connection: X2 HDMI 1.4a input
Supported Resolutions:
-1080p60 1920×1080
-WUXGA 1920×1200 (scaled resolution)
-HD720 1280×720
-UXGA 1600×1200
-WSXGA+ 1680×1050
-SXGA+ 1440×1080 & 1440×1050
-WXGA 1440×900
-SXGA 1280×1024
-XGA 1024×768
-SVGA 800×600
-VGA 640×480
-X2 via HDMI input port
Compression Standard: H.264/MPEG4 Part 10 (AVC) Baseline, Main, High profiles up to 4.2
Color Space Support: 24-bit RGB 4:4:4 YCbCr 4:2:0
HDCP 2.1 Support: X2
Scaling Support

2 CH Audio Encoding LPCM (Uncompressed) MPEG4 AAC-LC Sample Rate: (KHz); 11, 22, 24, 32, 44.1, 48, 96, 128,192 Bit Rates: (Kbps); 32, 96, 128,192, 320
2 CH Balanced Analog Audio Input:
-THD+N = .006% @20dBu
-Dynamic Range: 106dB
-Frequency Response: +/- 0.5dB (20->20KHz)
-Crosstalk: -80dB
-Removable Phoenix 3.55mm (3 pos × 2)
2 CH Unbalanced Analog Audio Input
-THD+N = -84dB, Dynamic Range = 90dBA
-SNR = 95dBA
-Crosstalk = -80dB, 3.5mm phone jack (T/S/R 3 pos.)
Digital Audio I/O: X2 input via HDMI ports
USB Audio: X1 input

10/100/1000 RJ45: X2 Gigabit ports
Video Streams (Channels): Up to 2 1080p@60Hz or 1920×1200@57Hz
Audio Streams (Channels): Stereo or multi-ch pass through 4 Streams (2 Analog (Stereo) and 2 Digital (Stereo or multi-ch)
StreamNet Discovery & Control: Requires StreamNet 3.1x or higher

Serial RS232 Port: DB9
IR Output: 3.5mm phone jack (T/R 3 pos.) (Compatible with StreamNet and other IR Emitters)
IR Input: 3.5mm phone jack (T/S/R 3 pos.) (Compatible with StreamNet IR Sensor only)
USB 3.0, 2.0: Future support
GPIO Inputs: X3, removable Phoenix 3.55mm (6 pos × 1) Contact Closure sensor input
GPIO Outputs: X3, removable Phoenix 3.55mm (6 pos × 1) Latching Relay Contact Closure output 20V@1A Max

Power: 19VDC / @2A Normal Operation / @6A Max
Rear Panel Power Button: Short press safe power cycle / long press forced shut down
Power LED Color Status:
State | LED Color
Normal | Blue
Boot | Green
Error | Red
Upgrade | Amber