IP control interface unit for VIEW Lite Encoder and Decoder for a dedicated IP network Flexible power options with PoE and DC

Key Highlights

  • Very low end-to-end (glass-to-glass) latency of around 1.5 frames / 25 ms
  • Up to 4K60 resolution support
  • PoE and DC power options
  • High bandwidth requirement of around 850 Mbps
  • USB HID for source control through keyboard and mouse

Applications

  • Corporate announcements
  • Video walls
  • Digital signage
  • Command centers

Workspaces

  • Workplaces
  • Schools
  • Hospitality centers
  • Entertainment centers
  • Transportation hubs
  • Command & Control centers

IP control interface unit for VIEW Lite Encoder and Decoder for a dedicated IP network Flexible power options with PoE and DC

Control

  • Serial RS232 Port:
    - RS232 Pins TX, RX, G are used for device troubleshooting only
    - Pins G, RX, TX are used for controlling, configuring and managing system
    - Pins G, 12V are used for providing a 12 VDC 0.5 A output
  • LAN1 (AV/PoE):
    - RJ-45 Ethernet jack with PoE support
    - IEEE 802.3AF PoE PD standard
    - 10/100/1000Mbps Ethernet Port
    - Connects to a switch for communication with encoders and decoders on the same network.
  • LAN2 (C):
    - RJ-45 Ethernet jack without PoE.
    -Used for 3rd-party controller controlling, configuring and managing system.

Mechanical

  • Dimensions (W x H x D): - 3.67” × 1.02” × 5.46” (93mm × 26mm × 139mm)
  • Weight: 0.84 lbs (0.38 kg)
  • Mounting: Mounting ears included
  • Operating Temperature: 32 to 104 °F (0 to 40 °C)

General

  • Reset: Factory reset by pressing the button continuously for 5 seconds
  • LEDs:
    - Status : Illuminates Blue when IP controller is working properly; otherwise LED is off.
    - Power : Illuminates Red when power is applied from PoE or external power supply.
  • Power: 12V 1A DC power supply with locking (included)

Related Products

Message Popup

Hi,

Welcome to our website.

Click Here