CONVERGE® Matrix
A highly scalable DSP mixer for Dante audio distribution applications
CONVERGE® Matrix
A highly scalable DSP mixer for Dante audio distribution applications
Key Highlights
- Reliable, modular, flexible
- Comes with multiple channel sizes: 512x512, 256x256, 128x128, 64x64
- Expands using field upgradable Expansion Card
- Distributes digital audio using Dante networking technology
- Works with all CONVERGE and any third-party Dante products
- Shows matrix views based on groups/zones
- Offers complete network and device redundancy the ultimate in reliability
Applications
- Sound reinforcement
- Live announcements
- Pre-recorded audio
- Background music
- Broadcast
Environments
- Government facilities
- Convention centers
- Auditoriums
- Transportation hubs
- Corporate buildings
- Universities
- Houses of Worship
- Hospitality & Entertainment venues
- Healthcare centers
- Cruise ships
MIC/LINE INPUTS & OUTPUTS
- 6 inputs
- 6 outputs
- Push-on mini-terminal block
- Frequency Response: 20Hz – 22kHz @ +4dBu +/- 0.5dBu
- Equivalent Input Noise (EIN): 20kHz BW, max gain, Rs = 150Ω, -126dBu
- Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
- Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, <-98dB
- Input Impedance (Mic/Line balanced line to ground): 2.2kΩ, 1%
- Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
- Maximum Input Level: -65dBu to 20dBu
- Phantom Power: Impedance: 6.81kΩ, 48V
- Output Impedance (Mic/Line balanced): 95Ω, 1%
- Output Level: 0dBu(Nominal), 20dBu (Max), -40dBu (Selectable)
DANTE™
- Audio channels: Up to 256x256 bidirectional @ 48kHz per pair of primary & secondary Dante ports
- Sample rate: 48kHz/96kHz
- Primary & Secondary network: Gigabit Ethernet RJ45 connector
- Expansion card: Up to additional 256 x 256 bidirectional @ 48kHz
EXPANSION BUS INPUT/OUTPUT
- Proprietary Link In & Out ports: RJ45 Cat5e/Cat6 connection for Redundancy setup
OTHER PORTS
- Ethernet: 10/100 Ethernet Network Port RJ45, auto negotiation
- Serial: RS-232, DB9 Female, Serial Command Protocol Only, 9600/19200/38400/115200 Baud; 8 bits, 1 stop, no parity
- USB: Type B connector, USB 2.0 compatible
- Control/Status: DB25 Female, 8 Open Collector Outputs, 12 Active High Inputs, 5VDC Power Source
- Device Identification: 8 pin DID switch
POWER
- 100-240V AC, 50/60 HZ, AC inlet
OPERATING TEMPERATURE
- 14°F/-10°C to 122°F/50°C
DIMENSION (W x D x H)
- 17” x 10.73” x 1.72”, 43.2cm x 27.3cm x 4.4cm
PART NUMBERS
- 910-3000-001: CONVERGE MATRIX 256 EX
- 910-3000-002: CONVERGE MATRIX 512
- 910-3000-003: CONVERGE MATRIX 256 EXPANSION CARD
- 910-3000-004: CONVERGE MATRIX 128 EX
- 910-3000-005: CONVERGE MATRIX 128 EXPANSION CARD
- 910-3000-006: CONVERGE MATRIX 64 EX
- 910-3000-007: CONVERGE MATRIX 64 EXPANSION CARD
